Green Link Blog by Melink

National Cut Your Energy Costs Day: Tips for Businesses

Written by Krista Rose | 1/6/20 1:00 PM

In the United States, January 10 is National Cut Your Energy Costs Day, a time that encourages people to look for ways to reduce energy usage and ultimately save on energy bills.

Melink offers five tips for businesses to cut their energy costs. Implement these solutions today to impact your business’ bottom line in the future!

 
 

Tip #1 — Ensure Your Building Has a Balanced Airflow

An air balance testing service is the process by which the performance of HVAC airflow is measured.  Once it is tested, the systems are then adjusted, or balanced, so that the air brought into a building is slightly greater than the air being pulled out of the building. The result is a comfortable, healthy indoor environment with an HVAC system that is optimized to perform efficiently. Read more air balance basics.

Keep in mind there are different degrees of air balance reports and you should choose an air balance contractor wisely. Not every balancing firm performs the same service or provides the same report at the end of the project. Hire a professional, certified firm like Melink Corporation.

 
 

Tip #2 — Conserve Energy in Commercial Kitchens

If your facility has a kitchen operation, this is an area where you can greatly reduce your operating costs, as well as occupant comfort. Consider installing a demand control kitchen ventilation (DCKV) system to control the variable speed of your kitchen’s exhaust fans.

Traditionally, kitchen exhaust fans run at 100% speed for constant periods of time.  With the addition of a variable speed system, like Melink’s Intelli-Hood®, fan speeds are reduced when cooking isn’t at its maximum. 

 
 

Tip # 3 — Replace Used Furnace Filters

This may sound like a simple fix, but dirty furnace filters can lead to defective equipment, airflow
issues, and ultimately higher energy bills. If a filter is clogged, airflow is reduced and the unit(s) will have to run longer to achieve the desired temperatures. Seasonally changing air filters within your building is one of the easiest, cheapest, and most effective ways to ensure maximum airflow output.

 
 
 

Tip # 4 — Monitor Your Building

Monitor your building’s health BEFORE a costly issue develops, such as mold growth, high energy bills, safety issues, or comfort issues for occupants. Melink offers PositiV®, a standalone tool to monitor your building’s performance data. A small investment now can lead to a great reduction in future energy costs.

 
 

Tip # 5 — Have a Replacement Plan

Whether your facility has an immediately aging HVAC unit or not, it’s important to plan for the future — especially with the phase-out of R-22. Emergency replacement, AKA “fix-on-fail,” is the costliest way to repair units. If you implement a proactive equipment replacement program, you can save approximately 70% per unit, which adds up to major energy cost savings.

 

National Cut Your Energy Costs Day may only happen once a year, but Melink offers energy-efficiency solutions for businesses year-round. With Melink, cut your commercial building's energy costs. Contact us today at (513) 965-7300.